Question: What Does The IP Address 172.17 4.250 24?

What is 24 subnet mask?

An IPv4 subnet mask consists of 32 bits; it is a sequence of ones (1) followed by a block of zeros (0).

The following example shows the separation of the network prefix and the host identifier from an address (192.0.

2.130) and its associated /24 subnet mask (255.255.

255.0)..

What are three private IPv4 address choose three group of answer choices?

The private addresses ranges are 10.0. 0.0/8, 172.16. 0.0/12, and 192.168. 0.0/16.

What are the two components of an IPv4 address choose two?

The bytes of the IPv4 address are further classified into two parts: the network part and the host part. The following figure shows the component parts of a typical IPv4 address, 129.144. 50.56.

What is the subnet mask for 32?

Understanding CIDR Subnet Mask NotationSubnet MaskCIDR PrefixUsable IP Addresses255.255.255.255/321255.255.255.254/312*255.255.255.252/302255.255.255.248/29629 more rows•Sep 1, 2020

What is the purpose of the subnet mask in conjunction with an IP address *?

Explanation: The subnet mask depicts the portion of the IP address that indicates the network from the portion of the address that indicates the host address on the network.

Why is 192.168 always used?

Long story short, we are using 192.168. X.X IP addresses because this is best practice. The IETF has created three IP ranges for private networks, with Class C being the smallest and easiest to control and maintain. This is why most routers use exactly this IP range.

How big is a 24 subnet?

How to subnet an IPv4 /24SizeNetmask/32255.255.255.224/2764255.255.255.192/26128255.255.255.128/25256255.255.255.0/245 more rows

What is the purpose of the command ping :: 1?

Using the command ping ::1 tests the internal IP stack to ensure that it is configured and functioning correctly. It does not test reachability to any external device, nor does it confirm that IPv6 addresses are properly configured on the host.

What does IP address 192.168 1.15 29 mean?

broadcast address According to the question, the given IP address falls under the category of the class C network mask (192 to 223). Again, /29 subnet mask indicates that the network address can be divided into 8 subnets. Thus, it represents the broadcast address.

Which three IP addresses are considered private addresses?

Private addresses include IP addresses from the following subnets:Range from 10.0. 0.0 to 10.255. 255.255 — a 10.0. … Range from 172.16. 0.0 to 172.31. 255.255 — a 172.16. … A 192.168. 0.0 to 192.168. 255.255 range, which is a 192.168. … A special range 100.64. 0.0 to 100.127. 255.255 with a 255.192.

What does it mean 192.168 0.0 24?

192.168.0.0 Refers to the IP adress /24 refers to the subnet. / 24 subnet is 255.255.255.0. 192.168.0.0/24 is common for home networks.

Why would a layer two switch need an IP address?

Explanation:A switch, as a Layer 2 device, does not need an IP address to transmit frames to attached devices. The IP address must be applied to a virtual interface rather than to a physical interface. … Routers, not switches, function as default gateways.

What are two reasons a network administrator might want to create subnets choose two?

Two reasons for creating subnets include reduction of overall network traffic and improvement of network performance. Subnets also allow an administrator to implement subnet-based security policies. The number of routers or switches is not affected.

What is a result of connecting two or more switches together?

When two or more switches are connected together, the size of the broadcast domain is increased and so is the number of collision domains. The number of broadcast domains is increased only when routers are added.

What is indicated by a successful ping to the?

A successful ping to this address means that the TCP/IP stack is correctly installed. It does not mean that any addresses are correctly configured.

How many IP addresses are in a 24?

CIDR, Subnet Masks, and Usable IP Addresses Quick Reference Guide (Cheat Sheet)CIDRSubnet MaskTotal IPs/27255.255.255.22432/26255.255.255.19264/25255.255.255.128128/24255.255.255.025629 more rows•Aug 26, 2011

How many hosts are in a 24?

For Class C Networksnetworknetwork masktotal hosts/count24255.255.255.025425255.255.255.12825226255.255.255.1922484 more rows•Mar 2, 2010

What is a 192.168 IP address?

192.168. 1.1 is a common factory IP address for a consumer-grade router. If the router is used for connecting to the Internet then all computers and devices which access the Internet through it will use this address as their default gateway.

What field content is used by ICMPv6 to determine?

What field content is used by ICMPv6 to determine that a packet has expired? Explanation:ICMPv6 sends a Time Exceeded message if the router cannot forward an IPv6 packet because the packet expired. The router uses a hop limit field to determine if the packet has expired, and does not have a TTL field.

What does 24 mean after an IP address?

2.0/24”, the number “24” refers to how many bits are contained in the network. From this, the number of bits left for address space can be calculated. As all IPv4 networks have 32 bits, and each “section” of the address denoted by the decimal points contains eight bits, “192.0.

How many subnets are in a 24?

Deducting 248 from 256 gives us 8 so the subnets are 0, 8, 16, 24, 32, 40, 48… 240,248.